Interactive Whiteboard Features

Pen Tray Optical sensors in the pen tray detect when you lift a pen or the eraser from the tray.

LEDs indicate the active tool.

Pens and Eraser Black, red, green and blue pens and a rectangular eraser

Resolution Touch resolution is approximately 4000 × 4000.

Screen Surface The hard-coated surface is tear proof, optimized for projection, compatible

with dry-erase markers and cleans easily with whiteboard cleaner.

Digitizing Technology Resistive technology

Frame Finish Dark gray (approximates Pantone® Charcoal Gray 18-0601 TPX) and

Ultrasonic Chrome (approximates metallic Pantone 877C)

Wall-Mount Bracket Includes a 32" (81.3 cm) wide bracket, five screws and five drywall anchors

to support your wall-mounted interactive whiteboard

Projector Mounting

Template

The template ensures simple installation and accurate alignment between the

UF55 projector and your SMART Board 680 interactive whiteboard.

Installation Instructions The installation instructions for your SMART Board 680i3 interactive whiteboard

system are included with the UF55 projector. Don’t use the installation instructions

included in your SMART Board interactive whiteboard box when installing your

SMART Board 680i3 interactive whiteboard system.

Theft Prevention The SMART Board 680 interactive whiteboard features a pen tray locking feature

and a Kensington® security slot on the pen tray.

UF55 Projector System Features

System Components UF55 projector, boom mount with a limit strap (including a controlled-collapse feature),

ECP, remote control and all necessary input cables from the ECP to the projector

Image Adjustment The mounting boom includes mechanical adjustments for aligning the projector image

with your interactive whiteboard. The projector also has a focus lever and a digital onscreen

menu for brightness, contrast and other image-related attributes.

Display Type True XGA 1024 × 768 projector

Display Technology The projection engine uses DLP® technology by Texas Instruments™,

providing BrilliantColor™ performance and quality Gamma 2.2 correction

with Bright Room, Dark Room, sRGB, User and SMART Presentation modes.

Brightness Estimated at 2000 lumens (typical) at a CCT of 6500 K by the IEC method

Lamp Life 3000 hours (Standard 200 W mode) or 4000 hours (Economy 160 W mode)

Aspect Ratio 4:3 native, with support for 16:9, 16:10 and 4:5 ratios

Contrast Ratio 2000:1

Video System

Compatibility

NTSC, NTSC 4.43, PAL, PAL-N, PAL-M, SECAM

Video Interface

Compatibility

Composite, S-video, and VESA RGB, with additional interface support for Component

YPbPr and Component YCbCR inputs with the proper adapters (not included)

Video Format

Compatibility

Native 4:3 aspect ratio XGA projector resolution. With scaling, supports VGA, SVGA,

SXGA, QuadVGA, SXGA+ and UXGA formats.

Synchronization Auto image synchronization (auto tracking, frequency, position adjustment,

source detect and phase detect)

Mounting Hardware Hardware is included for mounting the UF55 projector and the ECP to framed

and solid walls. Includes a safety tether and limit strap.

Input/Output Connections • Two HD DB15F connectors – RGB video input from computer and/or ECP

via VGA connectors

• HD DB15F connector – video output pass-through of Video Input 1 signal

• 4-pin mini-DIN connector – S-video input

• One pair of audio jacks (RCA, stereo) – reserved for use with S-video

• Composite video connector – RCA-style video input

• One pair of audio jacks (RCA, stereo) – reserved for use with composite video

• 3.5 mm stereo jack – audio input from your computer

• 3.5 mm stereo jack – audio output to connect speakers

• DB9M – serial (RS-232) for power to and communication with the ECP

• RJ-45 – network connection for SNMP management and control, and for sending

e-mail alerts

Projector Fan • Standard speed – 0 to 6000' (0 m to 1829 m): 41°F to 95°F (5°C to 35°C)

• High speed – 6000' to 6800' (1829 m to 2073 m): 41°F to 86°F (5°C to 30°C)

Projector Noise 36 dBA (high fan speed) or 31dBA (standard fan speed), measured using JIS method

Power Requirements 100V AC to 240V AC, at 50 Hz to 60 Hz

Power Cable Includes a 14' 9" (4.5 m) power cable

External Control The RS-232 connector is configured to accept control codes from your computer

or a room control system.

Power Consumption 385 W (Standard mode) to 504 W maximum. 5 W in Standby mode.

Remote Control Provides an alternative method of controlling the UF55 projector settings

Theft Protection The UF55 projector system features an optional padlocked ring to safeguard the

adjustment knob. The projector won’t function if it’s separated from the ECP and can’t

be operated without the remote control. A Kensington security slot is provided to affix

the system to a wall as a visual and physical theft deterrent.

ECP Features

Input/Output Connections • HD DB15F connector – RGB video from your computer (supports component

video CAV, YPbPr or YUV)

• HD DB15F connector – RGB video to projector

• DB9F – serial (RS-232) computer or room control connection

• DB25M – provides input signals and control signals to the projector

• 4-pin mini-DIN connector – S-video input

• One pair of audio jacks (RCA, stereo) – reserved for S-video

• Composite video connector – RCA-style video input

• One pair of audio jacks (RCA, stereo) – reserved for composite video

• 3.5 mm stereo jack – computer audio input

Power Button Turns the projector on and off

Input Selection Buttons Provide control for the following input types:

• S-video and associated audio (RCA jacks)

• Composite video and associated audio (RCA jacks)

• Computer 2 VGA input and associated 3.5 mm audio stereo jack